Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Diagnostics, Repairs, and Maintenance
The Sherwood 09959K impeller is supplied with an O-ring, gaskets and technical guide. It has 12 vanes and a through key keyway. The neoprene impeller fits on a 5/8" pump shaft and is designed to pump water.
Sherwood marine raw water pumps feature a flexible neoprene impeller that attaches to the shaft. The shaft rotation powers the impeller which transfers water by creating a vacuum on the inlet side and then forcing water out on the outlet side. As such an important component, you should ensure that your pump impeller is always in top condition and that you always use the correct impeller for your application. This will help to ensure the best engine performance and prolong engine life.
Sherwood recommend that all impellers are replaced at least annually (depending on application) to maintain impeller performance, however it is good practice to inspect them often to check for excessive abrasions or damage. It is also recommended that during long periods of being unused, impellers should be removed from the pump to prevent UV deterioration, vanes setting into position and copper bonding of the impeller to the housing. Any impeller issues can lead to engine overheating, the main reason for premature engine wear.
The 09959K impeller fits the following pumps:
- Sherwood A03 pumps used in Chrysler Marine Slant 6 engines (Chrysler 2659553).
- Sherwood A16 pumps used in Chris Craft Model A engines.
- Sherwood B06 pumps used in Perkins 4-107 diesel engines.
- Sherwood D55 & P10550G pumps used in Chrysler Marine M383X, M413E, M440X engines (Chrysler 2847629 & E-7592-M).
- Sherwood D60, D65, N10390G & R10935G pumps used in Chrysler Marine M273X, LM318X engines (Chrysler 2847630, 2847631, E-7584-M & E-9327-M).
- Sherwood D75 & Q10855G pumps used in Chrysler Marine M225X engines (Chrysler 2847632 & E-8542-M).
- Sherwood F85 pumps used in Westerbeke Pilot 10-20 engines (Westerbeke 16423).
- Sherwood G15 and G30-2B pumps used in Chris Craft Model 350 engines (Chris Craft 16.80-18346).
- Sherwood G20 & G21-01 pumps used in Pleasurecraft Marine 302 & 351 engines.
- Sherwood G22-01 pumps used in Mitsubishi 4 Cylinder. engines.
- Sherwood G30-2 pumps used in Chris Craft Model 350 engines (Chris Craft 16.80-18346) and Volvo Penta engines.
- Sherwood G65 pumps used in Perkins 4-108 diesel engines (Perkins NA003335).
- Sherwood G95-1 pumps used in Glastron 121, 182 & 302 CI engines.
- Sherwood G9902 & G9903 pumps used in Volvo Penta & OMC 4 Cylinder. engines (3852399 & 3855079).
- Sherwood H10 pumps used in Crusader Chevy V6 engines (Crusader 97512).
- Sherwood H5 pumps used in Perkins 4-154 diesel engines (Perkins NA005576).
- Sherwood J70 pumps used in Commander 302 & 351 engines (Commander CM1-10-610).
- Sherwood J90 pumps used in Pathfinder 4 Cylinder. engines.
- Sherwood K75 & K75B pumps used in Onan 4 Cylinder. diesel engines (Onan 132-0275 & 132-0276).
- Sherwood M10065G & L9930G pumps used in Gray Marine 6 Cylinder. engines (Gray Marine G77475 & G77560).
- Sherwood M10210G, N10410G, P10700G, F15 pumps used in Crusader Interceptor engines.
- Sherwood M10263G pumps used in Chris Craft Model M engines (Chris Craft 16.80-10008).
- Sherwood M10264G pumps used in Chris Craft Model W engines (Chris Craft 16.80-10009).
- Sherwood M10270G, M10280G, Q10755G, Q10765G pumps used in Crusader Chevy RH Rotation engines.
- Sherwood N10460 pumps used in Gray Marine Compact V8 215, 225 CCW (Gray Marine G80301).
- Sherwood N10470 pumps used in Gray Marine Compact V8 215, 225 CW (Gray Marine G80300).
- Sherwood N10510G, P10650G, L9930G pumps used in Gray Marine 4 Cylinder. engines (Gray Marine G78478, G78972 & G77560).
- Sherwood P10560G pumps used in Chrysler Marine M80 (CW) engines (Chrysler E5913-M).
- Sherwood P10610G pumps used in Chrysler Marine Slant 6 engines (Chrysler E-7783-M).
- Sherwood P10710G pumps used in Chrysler Marine M80 (CCW) engines (Chrysler E5839-M).
- Sherwood Q10770G & R10955G pumps used in Gray Marine Gov engines (Gray Marine G76647 & G80971).
- Sherwood R10870G pumps used in Medalist Light Plants engines.
- Sherwood R10870G-01 pumps used in Westerbeke Gov Life Boat engines (Westerbeke 11353).
- Sherwood R10920G & L9920G pumps used in Gray Marine Fireball V8 (CCW Rotation) engines (Gray Marine G80784 & G77585).
- Sherwood R10925G & M10180G pumps used in Gray Marine Fireball V8 (CW Rotation) engines (Gray Marine G80785 & G77586).
- Sherwood R10930G pumps used in Medalist Sabre V6 engines.
- Sherwood R50G, G1 & G2 pumps.
- Sherwood R991 pumps used in Yamaha 4.3 V6, 305/350 Chevy engines (Yamaha 10100000).
- Sherwood RPGC pumps used in Onan 12MDJC-15 MDJF & 30MDEH-50MDEG engines (Onan 132C115).
- Sherwood G9901 pumps used in Volvo Penta & OMC 6-8 cyl. engines (3852398), including Volvo Penta: 4.3GIPHUSCE, 4.3GIPNCACE, 4.3GIPNCBCE, 4.3GIPNCMCE, 4.3GIPNCSCE, 4.3GLMMDA, 4.3GLPHUB, 4.3GLPMDA, 4.3GLPNCA, 4.3GLPNCB, 4.3GLPNCS, 4.3GSJNCC, 4.3GSJNCS, 4.3GSPHUB, 4.3GSPHUS, 4.3GSPMDA, 4.3GSPNCA, 4.3GSPNCB, 4.3GSPNCM, 4.3GSPNCS, 5.0FIPHUBCE, 5.0FIPHUCCE, 5.0FIPHUECE, 5.0FIPHURCE, 5.0FIPHUSCE, 5.0FiPMDA, 5.0FiPMDM, 5.0FIPNCACE, 5.0FIPNCBCE, 5.0FIPNCMCE, 5.0FIPNCSCE, 5.0FLPHUB, 5.0FLPHUC, 5.0FLPHUE, 5.0FLPHUR, 5.0FLPHUS, 5.0FLPMDA, 5.0FLPNCA, 5.0FLPNCB, 5.0FLPNCM, 5.0FLPNCS, 5.7GIIMDA, 5.7GIINCCCE, 5.7GiPHUS, 5.7GIPMDA, 5.7GIPMDACE, 5.7GIPNCACE, 5.7GIPNCBCE, 5.7GIPNCMCE, 5.7GIPNCSCE, 5.7GLIMDA, 5.7GLPMDA, 5.7GLPNCS, 5.8FIIHUBCE, 5.8FIIHUECE, 5.8FIPHUBCE, 5.8FIPHUCCE, 5.8FIPHUECE, 5.8FIPHURCE, 5.8FIPHUSCE, 5.8FiPMDA, 5.8FiPMDM, 5.8FIPNCACE, 5.8FIPNCBCE, 5.8FIPNCMCE, 5.8FIPNCSCE, 5.8FLIHUB, 5.8FLIHUE, 5.8FLINCC, 5.8FLINCS, 5.8FLPHUB, 5.8FLPHUC, 5.8FLPHUE, 5.8FLPHUR, 5.8FLPHUS, 5.8FLPMDA, 5.8FLPNCA, 5.8FLPNCB, 5.8FLPNCM, 5.8FLPNCS, 5.8FSIINCC, 5.8FSIINCS, 5.8FSIINCS, 5.8FSIPHUBCE, 5.8FSIPHUCCE, 5.8FSIPHUECE, 5.8FSIPHURCE, 5.8FSIPHUSCE, 5.8FSIPNCACE, 5.8FSIPNCD, 5.8FSIPNCS, 7.4GIIHUBCE, 7.4GIINCCCE, 7.4GIINCSCE, 7.4GIPHUSCE, 7.4GIPNCACE, 7.4GIPNCBCE, 7.4GIPNCMCE, 7.4GIPNCSCE, 7.4GLIHUB, 7.4GLIMDA, 7.4GLIMDM, 7.4GLINCC, 7.4GLINCS, 7.4GLPHUS, 7.4GLPMDA, 7.4GLPMDM, 7.4GLPNCA, 7.4GLPNCB, 7.4GLPNCM, 7.4GLPNCS, 7.4GSIINCC, 7.4GSIINCS, 7.4GSIXHUS, 7.4GSIXNCB, 7.4GSIXNCM, 8.2GLIMDA, 8.2GLIMDM, 8.2GLPMDA, 8.2GLPMDM & 8.2GSIXNCB.
| Brand | Sherwood |
| Impeller Shaft Diameter | 15.9mm |
| Number of Impeller Blades | 12 |
| Construction | Neoprene |
| Contents | Sherwood: 09959 Impeller, 10103 Gasket, 10609 Gasket, 10612 Gasket, 11360 Gasket, 12231 O-Ring, 12855 Gasket & L-3051 Impeller Kit Tech. Guide |
| Diameter | 62.5mm (2-7/16"), Shaft 15.9mm (5/8") |
| Dimensions | Keyway: 4.8mm (3/16") Through Key |
| Drive Type | Key Drive |
| Model | 09959K |
| Replaces | Copy Impeller: 18838. Sherwood 12981 Minor Repair Kit (when bought with SW10514 shaft seal). |
| Suitability | See Description |
| Depth | 32mm (1-1/4") |
All returns must be authorized. Items returned prior authorization will not be accepted.
Defective new equipment may be returned for warranty repair/exchange to us within five (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to a repair charge.
Non-Defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returns in which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
**There's a 20% Restocking Fee on All Returned Palmgren Products in Original Packaging
To get your RMA, simply call (800) 364-4637 for a return authorization number or email sales@palmerpower.com .
(Do not write anything on the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.) Please include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty days.
To check the status of your return, please email us at sales@palmerpower.com. Please be sure to include your RMA number. For more information please check our FAQ page.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
We will service your boat whether you bought it from us or not. Our award-winning boat service department has a full-time staff of seasoned, factory-certified technicians dedicated to ensuring that your boat runs well for years to come. Our team is trained to correctly diagnose issues, advise you of any developing problems, and address any unique service issues your boat may require. Whether you need complex engine work and repairs, canvas and upholstery, boat tune Up, electronics installation or repair, or boat detailing, our technicians will work quickly to keep you out of the shop and on the water. Not only does our service department provide the highest quality service, we also have a large parts department for the do-it-yourself types. Ask about our inventory of parts and aftermarket additions to make your own repairs or upgrades.
All returns must be authorized. Items returned prior authorization will not be accepted. International customers must ship any returns to us freight and duty prepaid. Return freight charges for International shipments will be the responsibility of the customer.
Defective new equipment may be returned for warranty repair/exchange to us within five (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to a repair charge.
Non-Defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returns in which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anything on the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.) Please include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty days.Palmer Power accepts a variety of payment options for your convenience. For prepayment, we accept all major credit cards (Visa, MasterCard, Discover and American Express), Purchase Orders, and international wire transfers. We also offer credit terms to existing customers.
